Are there any life hacks for the installation of pin terminals?
There are some simple rules that will save you from possible mistakes:
- Remove the insulation 1-3 mm more than the length of the terminal contact part. In this case, the end of the wire will go exactly until the end of the barrel inside the contact part. There is a chart with data about the correct length, see characteristics of НШВИ insulated pin terminals.
- If you have lost at least one wire drying removing of the insulation, it is very important to cut this part and repeat the operation again with no wires lost.
- Make the correct choice of the terminal size that ideally matches the cross-section of the wire.
- Use professional tools
- If you still see more than 1 mm of the wire outside the terminal, cut it a little.