Equipment of the KBT laboratory
Every year the experimental and testing base of the KBT laboratory is replaced by the new devices and machines that allow carrying out deep research work and applying fundamental and innovative quality control technologies.
High voltage loading equipment
Rated power consumption, kVA | 4 |
Rated output current, A | 2000 |
Maximum output current, A | 6000 |
Operating mode at rated current | Long term |
Operating mode at maximum current | re-short-term |
Climatic chamber
Temperature control range, °С | from -70 to +150 |
Control range of relative humidity, % | from 15 to 98 |
Dimensions of the internal space of the chamber, сm | 60 × 80 × 85 |
The volume of the internal space, dm3 | 408 |
Ability to set constant and cyclic test modes | + |
Colour touch screen | + |
Ability to connect to a computer | + |
Salt fog chamber
The range of constant temperature, °С | 25 - 35 |
Dimensions of the internal space, сm | 90 × 60 × 50 |
The volume of the internal space, dm3 | 270 |
Accuracy of the temperature maintenance, °С | ±1 |
Ability to set constant and cyclic modes of spraying of a salt solution | + |
High voltage test machine SKAT-70
Range of variation of the output test AC voltage, kV | 0 - 51 |
Range of output DC voltage test, kV | 0 - 71 |
Maximum current of the test voltage circuit in the measurement mode, mA | 35 |
Current protection operation in the measurement mode, mA | 36 |
Test output rise voltages | Manual and automatic |
Rate of rise of the output test voltage, kV / sec | 1; 2,5; 5; 10 |
Hardness tester №1
Range of applied loads, kg | 1; 5; 10; 20; 30; 50 |
The range of measurement of hardness in Vickers scale, HV | 5,0 - 2900 |
Hardness tester №2 (HBRVU-187,5)
The range of measurement of hardness the Rockwell scale |
70-93HRA 25-100HRB 20-70HRC |
The range of measurement of hardness the Brinell scale | 3-650HBW при нагрузках from 30 kg to 187,5 kg |
The range of measurement of hardness Vickers ' scale | 15-3000HV at load 30 and 100 kg |
Hardness tester №3 (Temp-4)
The range of measurement of hardness the Rockwell scale, HRC | 22 - 68 |
The range of measurement of hardness the Brinell scale HB | 95 - 460 |
The range of measurement of hardness Vickers scale, HV | 95 - 950 |
The limits of measurement of hardness the scale of shore, HSD | 23 - 99 |
Microohmmeter
Range of measured resistance, MCOM | 1,0 - 1999 |
Permissible basic error, % | ±1 |
Continuous operation time, hour | 8 |
Measurement time, sec | 10 |
Teraohmmeter
The range of measured resistance, μω | 102 - 1013 |
Voltage value at measurement, V | 10; 100 |
Three-electrode measurement scheme | + |
Equipment of the measuring chamber | + |
Megohmmeter
Insulation resistance measurement range, Ohm | 104 - 9,99 · 109 |
The measured AC voltage frequency of 50 Hz, V | 40-400 |
Values of test voltages, V | 500; 1000; 2500 |
The device measures the absorption coefficient | + |
Tensile strength test machine №1
tensile and compressive forces, N | 60 - 30000 |
Speed control range tear/compression, mm / min | 1 - 100 |
Number of measured parameters | 12 |
Tensile strength test machine №2
tensile and compressive forces, N | 4 - 2000 |
Speed control range tear/compression, mm / min | 1 - 100 |
Number of measured parameters | 12 |
The RLC meter
Resistance measurement range, Ohm | 10-3 - 107 |
Measuring range of inductance, GN | 10-5 - 2 ·104 |
The range of capacitance, f | 10-12 - 2 ·10-4 |
Measuring range of dielectric loss angle tangent | Not less 0,001 |
Ability to connect to a computer | + |
Two-electrode measurement scheme | + |