Non- insulated end sleeves НШВ

type: НШВ

Designed for termination of stranded copper conductors by the crimping method. Transforms the ends of the stranded conductors into the monolithic pins
Dimensions of end sleeves НШВ are designed for the installation of one conductor of the corresponding size. However, since the plastic restrictive cuff is missing, the sleeve can also be used for the connection of two or more conductors
The facility of cores into the sleeve is made from the side of the socket
Sleeve material: copper, grade M1
Coating: electrolytic tinning
Operating temperature range: -55 °C to +135 °C
Due to the extended temperature range, the end sleeves НШВ are recommended in use with heat-resistant wires with insulation of silicon-organic rubber, grades ПРКА, ПРКС, ПВКВ, РКГМ
Sleeves without cuffs indispensable for termination of the wires with thick insulation (e.g., cables with rubber insulation КГ and КОГ)
End sleeves НШВ are presented with a standard length. Under the pre-order, end sleeves НШВ can be produced with an increased length

Name	Cross section mm²	Cross section AWG	L(mm)	d(mm)	d₁(mm)	d₂(mm)	l* (mm)
НШВ 0.5-8 (КВТ)	0.5	20	8	1.3	0.9	1.7	8
НШВ 0.75-8 (КВТ)	0.75	18	8	1.5	1.2	1.9	8
НШВ 1.0-8 (КВТ)	1.0	17	8	1.8	1.4	2.2	8
НШВ 1.5-8 (КВТ)	1.5	16	8	2.0	1.6	2.5	8
НШВ 2.5-8 (КВТ)	2.5	14	8	2.6	2.3	3.3	8
НШВ 4.0-9 (КВТ)	4.0	12	9	3.2	2.8	3.9	9
НШВ 6.0-12 (КВТ)	6.0	10	12	3.9	3.5	4.8	12
НШВ 10-12 (КВТ)	10.0	7	12	4.9	4.5	5.8	12
НШВ 16-12 (КВТ)	16.0	6	12	6.2	5.8	7.2	12
НШВ 25-16 (КВТ)	25.0	3	16	7.9	7.5	9.1	16
НШВ 35-16 (КВТ)	35.0	2	16	8.7	8.3	10.2	16
НШВ 50-20 (КВТ)	50.0	1	20	10.9	10.4	12.4	20
НШВ 70-20 (КВТ)	70.0	2/0	20	14.3	13.5	15.8	20