Cast resin joints МКС

type : МКС

  • TU 3599-057-97284872-2014
  • Intended for connection of power cables:
    • with armor and without armor
    • with plastic insulation (PVC\XLPE)
    • voltage up to 1 kV
  • Set :
    • fast dry two component polyurethane compound
    • transparent plastic case
    • connector blocks in polymer case КСМ
    • tape- sealant
    • insulating PVC tape
    • sandpaper
    • latex gloves
  • Available for listed cable types: (А)ВВГ, NYM, (А)ПвВГ, (А)ВБбШв, (А)ПвБбШв, (А)ПвБбШп;
  • Joints kit is universal and can be used on 3-cores, 4-cores and 5-cores cables;
  • For connection of cores in the joints kit included - connector blocks in polymer case КСМ  with hex  key wrench
  • As insulating and sealing material is used- two component application of self-hardening polymer compound;
  • Polymer compound is put in separate sections, of durable polyethylene packing with a separator. While mounting, the separator is removed and the compounds are thoroughly mixed before pouring into the joints case;
  • Does not require usage of open flame for installation. Can be used in places with special requirements for fire- and explosion safety;
  • Transparent case provides visual control for uniform filling of all voids between the cores;
  • Usage of a hydrophobic compound provides leak proof connection ;
  • No any special tools required for installation;
  • For  installation of the joints on cable with the armor, it is recommended to use (in the basic kit not included):
    • For МКС-1 : Roll springs ППД№1 , flexible, copper grounding braids (insulated) (ПВ-3 or equivalents), at least 6 mm2
    • For МКС-2 : Roll springs ППД№2 , flexible, copper grounding braids (insulated) (ПВ-3 or equivalents), at least 10 mm2