ProductsEnd sleeves

type: НШВ

Non- insulated end sleeves НШВ

type : НШВ

By TU 3424-001-59861269-2004

  • Designed for termination of stranded copper conductors by crimping method. Transforms the ends of the stranded conductors into the monolithic pins
  • Dimensions of end sleeves НШВ are designed for installation of one conductor of the corresponding size. However, since the plastic restrictive cuff is missing, the sleeve can also be used for connection of two or more conductors
  • The facility of cores into the sleeve is made from the side of the socket
  • Sleeve material: copper , grade M1
  • Coating: electrolytic tinning
  •  Operating temperature range: -55 °C to +135 °C
  • Due to extended temperature range, the end sleeves НШВ are recommended in use with heat-resistant wires with insulation of silicon-organic rubber, grades  ПРКА, ПРКС, ПВКВ, РКГМ
  • Sleeves without cuffs indispensable for termination of the wires with thick insulation (e.g., cables with rubber insulation КГ and КОГ)
  • End sleeves НШВ are presented with a standard length. Under the pre-order, end sleeves НШВ can be produced with the increased length 

  • Key parameters
  • Watch more
  • Quality certificate (PDF)
  • Installation tools
Name Cross section Dimensions (mm) F* (mm)
mm² AWG L d d₁ d₂
НШВ 0.5-8 (КВТ) 0.5 20 8 1.3 0.9 1.7 8
НШВ 0.75-8 (КВТ) 0.75 18 8 1.5 1.2 1.9 8
НШВ 1.0-8 (КВТ) 1.0 17 8 1.8 1.4 2.2 8
НШВ 1.5-8 (КВТ) 1.5 16 8 2.0 1.6 2.5 8
НШВ 2.5-8 (КВТ) 2.5 14 8 2.6 2.3 3.3 8
НШВ 4.0-9 (КВТ) 4.0 12 9 3.2 2.8 3.9 9
НШВ 6.0-12 (КВТ) 6.0 10 12 3.9 3.5 4.8 12
НШВ 10-12 (КВТ) 10.0 7 12 4.9 4.5 5.8 12
НШВ 16-12 (КВТ) 16.0 6 12 6.2 5.8 7.2 12
НШВ 25-16 (КВТ) 25.0 3 16 7.9 7.5 9.1 16
НШВ 35-16 (КВТ) 35.0 2 16 8.7 8.3 10.2 16
НШВ 50-20 (КВТ) 50.0 1 20 10.9 10.4 12.4 20
НШВ 70-20 (КВТ) 70.0 2/0 20 14.3 13.5 15.8 20