Self sintered insulation tape

type : СИЛ-20

Designed to restore and repair the damage of insulation self-supporting wires, as well as cable sheath for voltage up to 1 kV
While removing the piercing clamps from the self-supporting wires line, in the place of piercing, wire insulation has to be repaired with tape СИЛ
The tape is manufactured based on ethylene-propylene rubber, self-vulcanized while winding and forming a single monolithic structure
Has high electric strength
Resistant to UV rays and weather conditions
During repair work, separation liner has to be removed and winding of the tape has to be made in preload, with triple pulling
The part of insulation, restored by self sintered insulation tape СИЛ, does not require mechanical or temperature effects after winding
Allows sealing complex shapes parts

Elongation at break point	not less than 500%
Operating temperature	-30 °C to +70 °C
Tensile strength	not less than 5MPa
Electric durability	at least 20 kV/mm
Operating voltage	Up to 1 kV
Specific volume electrical resistance	10¹⁴ Ом/cm