Aluminium cable lugs ТА (КВТ)

type : ТА

GOST   9581-80

  • Designed for termination of aluminium wires and cables by means of crimping
  • Material: electrical aluminium ,grade  AD1M
  • Sector shaped conductors before crimping should be pre-rounded with a help of rounding dies  НМ-300-С (КВТ)
  • After stripping, the ends of aluminium cable must be cleaned to bright metal with a help of cord- brush or sandpaper, and then, on the ends of the cores should be applied quartz-vaseline paste or electrical contact grease "КВТ".
  • The tubular part of the lugs should also be filled with quartz-vaseline paste or electrical contact grease "КВТ". After filling lugs, insert the wires into  it against the stop and then perform crimping . 

  • Key parameters
  • Video overview
  • Watch more
  • Production standards (PDF)
  • Quality certificate (PDF)
  • Printable docs (PDF)
  • Installation tools
  • Recommended with

Main characteristics

Name  Nominal cross section (mm²) Size of bolt Dimensions (mm)
D B L d d₁
TA 10-8-4.5 (KBT) 10 М 8 8.4 16.5 54.0 8.5 4.5
TA 16-8-5.4 (KBT) 16 М 8 8.4 16.5 59.0 10.0 5.4
TA 25-8-7 (KBT) 25 М 8 8.4 18.0 62.0 12.0 7.0
TA 35-10-8 (KBT) 35 М 10 10.5 20.0 68.0 14.0 8.0
TA 50-10-9 (KBT) 50 М 10 10.5 23.0 75.0 16.0 9.0
TA 70-10-12 (KBT) 70 М 10 10.5 25.0 86.0 18.0 12.0
TA 95-12-13 (KBT) 95 М 12 13.0 28.0 89.0 20.0 13.0
TA 120-12-14 (KBT) 120 М 12 13.0 33.0 96.0 22.0 14.0
TA 150-12-17 (KBT) 150 М 12 13.0 34.0 107.0 24.0 17.0
TA 185-16-19 (KBT) 185 М 16 17.0 36.0 116.0 26.0 19.0
TA 240-20-20 (KBT) 240 М 20 21.0 40.0 126.0 28.0 20.0
TA 300-20-24 (KBT) 300 М 20 21.0 48.0 145.0 32.0 24.0